Enerlites MPC-50HD Sensor Switch, 800W, PIR Occupancy, 360° Coverage, Indoor

Description

Enerlites MPC Sensor Switch — Indoor & PIR Occupancy

The Enerlites MPC-50HD is an advanced sensor switch designed for high bay applications, featuring a PIR occupancy detection system. This sensor switch, finished in indoor white, offers a comprehensive 360° coverage area, making it ideal for warehouses and large storage facilities. It operates on 120-277VAC and supports 0-10V dimmable lighting fixtures.

Key Features

• Voltage: Compatible with 120-277VAC, 50/60 Hz for versatile installation.
• Load Rating: Supports up to 800W at 120VAC, suitable for various lighting types.
• Coverage Area: Offers up to 2800 sq. ft. of coverage with a 360° field of view.
• Sensor Modes: Includes four occupancy logic options for tailored control.
• Adjustable Settings: Time delay adjustable from 15 seconds to 30 minutes.
• Neutral Wire: Requires a neutral wire for proper operation.
• Dimming Capability: Supports 0-10V dimmable lighting with bi-level dimming to 50%.
• Construction: Features a fixed mount design with interchangeable 360° fresnel lenses.
• Indicator Light: LED indicator flashes to confirm motion detection.
• Compliance: Meets CA Title 24 requirements and NEMA WD7-2000 standards.

Construction & Interface

This sensor switch features a robust design with interchangeable 360° fresnel lenses for optimal coverage. The indoor finish complements commercial settings, and the LED indicator provides visual confirmation of motion detection. Note that the wallplate is sold separately.

Sensor, Smart & Timer Capabilities

The Enerlites MPC-50HD offers advanced PIR occupancy detection with adjustable sensitivity and ambient light levels. It supports bi-level dimming to 50% and includes four occupancy logic options for customized control. The time delay can be set between 15 seconds and 30 minutes.

Wiring & Installation

Installation requires a neutral wire and supports single or parallel sensor configurations. It includes a 42′ wire lead and an 18′ 0-10V dimmable wire lead for connection to dimmable ballasts. The sensor is designed for fixed mount applications in high bay environments.