Description
The Keystone BPLED SmartLoop Panel is a 1×4 backlit LED panel for commercial offices, classrooms, and healthcare spaces where integrated occupancy sensing, daylight harvesting, and field-adjustable output are all needed in a single fixture. An embedded SmartLoop Bluetooth mesh sensor controller ships pre-commissioned for stand-alone occupancy and daylight control out of the box, and can be further configured via the SmartLoop app to create zones, set schedules, adjust high-end trim, and build scene control. Both wattage and CCT are adjustable via dip switches inside the driver compartment.
- Suited for commercial offices, classrooms, retail spaces, and healthcare facilities where energy-saving sensor control and output flexibility are both required.
- Selectable wattage: 20W/30W/35W via internal dip switch; adjust power output on site without replacing the fixture (factory preset: 35W).
- Selectable CCT: 3500K/4000K/5000K via internal dip switch (factory preset: 5000K).
- Maximum output of up to 4,270 lumens at 35W, 4000K; 80+ CRI across all wattage and CCT combinations.
- Integrated SmartLoop PIR motion sensor and daylight sensor ship pre-commissioned with occupancy mode, 20-minute hold time, 1-minute standby time, and 50% standby dimming by default.
- Dims smoothly to 1% via 0-10V control; requires separate 0-10V DC dimming circuit.
- Backlit design with precision optical lenses over each individual LED for consistent surface illumination and minimal glare.
- Suitable for damp locations; operates on 120-277V universal voltage; operating temperature range of -4°F to 104°F; rated for 50,000 hours.
Reviews
There are no reviews yet.