Enerlites DWOS-J-W Sensor Switch, 800W, PIR Occupancy/Vacancy, Single-Pole, Indoor

Description

Enerlites DWOS Sensor Switch — Indoor & PIR Occupancy/Vacancy

The Enerlites DWOS-J-W is an indoor sensor switch designed for efficient lighting control using PIR technology. Available in white, this sensor switch offers a single-pole configuration and supports incandescent, fluorescent, and LED lights up to 800W at 120VAC. It features a 180-degree field of view, covering up to 1200 sq. ft., and operates in both occupancy and vacancy modes.

Key Features

• Voltage: Compatible with 120VAC and 277VAC, 60 Hz.
• Load Rating: 800W at 120VAC, 1600VA at 277VAC.
• Pole Configuration: Single-pole use only.
• Sensor Modes: PIR occupancy and vacancy modes for energy-efficient operation.
• Time Delay: Adjustable from 15 seconds to 30 minutes.
• Ground Wire Requirement: Ground wire is required for installation.
• Manual Control: Includes a manual ON/OFF push-button.
• LED Indicator: Flashes to confirm motion detection is active.
• Walk-through Mode: Increases energy savings by turning lights off shortly after momentary occupancy.
• Dimensions: 3.00 in. width x 5.00 in. height x 2.25 in. length.
• Warranty: 5-year warranty for peace of mind.

Construction & Interface

The Enerlites DWOS sensor switch features a durable construction suitable for indoor environments. It includes an LED indicator light for motion detection verification. The switch is available in a white finish, and the wallplate is sold separately.

Sensor, Smart & Timer Capabilities

This sensor switch employs PIR technology to detect occupancy and vacancy, allowing for automatic lighting control. The adjustable time delay and walk-through mode enhance energy efficiency by minimizing unnecessary lighting.

Wiring & Installation

The Enerlites DWOS-J-W requires a ground wire for installation. It is designed for single-pole applications and supports a wide range of lighting types. Ensure proper wiring for optimal performance.